The Fundamentals of Assessment Validation: How to Validate Assessments

The Fundamentals of Assessment Validation: How to Validate Assessments

Blog Article

With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.

Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.

In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.

Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.

According to the standards, two types of validation must be conducted.

The first type of assessment validation checks that your RTO's assessment aligns with the training package requirements in your scope.

The second validation ensures assessments are conducted according to the principles of assessment and rules of evidence.

This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.

The Fundamentals of the Two Types of Assessment Validation

Comprehending Assessment Validation

As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.

Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

This discussion will center around assessment tool validation.

How to Properly Conduct Assessment Tool Validation

Now that we understand the two types of validation, let’s explore the details of assessment tool validation.

When to Conduct Assessment Tool Validation

Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.

Therefore, any time you obtain new learning resources, assessment tool validation should be completed before students use them.

There's no necessity to wait for the next 5-year cycle validation schedule. Validate new resources immediately to ensure they are appropriate for student use.

Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:

- when resources are updated
- you add new training products on scope
- reviewing your course against training product updates
- when learning resources are identified as a risk during your risk assessment

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

Which Training Products Should You Validate?

Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.

What You Need for Assessment Tool Validation

Learning Resources

To conduct assessment tool validation, you will need the entire suite of your learning resources:

Mapping tool – this should be the first document to examine. It shows which assessment items correspond to unit requirements, facilitating quicker validation.

Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.

Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.

Validation Committee

Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.

Overall, your validation panel should have:

Relevant vocational competencies and up-to-date industry skills for the unit being validated

Current knowledge and skills related to vocational teaching and learning

One of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its equivalent

Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.

While ASQA does not have a recommended or required template for assessment tool validation, many templates are available online. These tools generally require validators to review the tools as a whole to see if they meet the principles of assessment.

Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.

It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?

As detailed in our blog post Common Problems In Assessment Tools, it is crucial that your assessment tools enable trainers to adhere to assessment principles and evidence rules.

Principles of Assessment
Fairness – Is the assessment process equitable and accessible to everyone?

Flexibility – Are various options provided in the assessment to demonstrate competence based on different needs and preferences?

Validity – Does the assessment assess what it is intended to assess? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Evidence Key Rules

Validity – Is the evidence proof that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool confirming that the work is the candidate’s own?

Currency – Are the assessment tools in line with current units of competency and contemporary industry practices?

Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To avoid employing learning resources that leave unit requirements unmet, be sure to follow these guidelines:

Live Up to Your Words

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Carry out each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:

diaper change

prepare bottles, feed infants from bottles, and clean equipment

prepare solid foods and feed babies

respond properly to infant signs and cues

prepare infants for sleep and soothe them

monitor and promote age-appropriate physical exploration and gross motor skills

Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.

All or No Competence

Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What details can be included in a work package?

Answers might include:

Necessary materials

Applicable expenses

Activity duration

Appointed duties and responsibilities

If an assessment item requires multiple answers, specify the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. click here These can confuse students and assessors, as demonstrated in the sample question below:

Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.

Possible answers include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, personal protective equipment

Work area and ground conditions – eliminating hazards, isolating, engineering controls

People – isolation, engineering controls, administration

Structural hazards – substitution, isolation, engineering

Chemical hazards – isolation, use of engineering controls, administrative controls

Equipment or machinery – isolation, engineering controls, administration

Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.